Humma laser smart series
Laser engraving machine
- Full working area 600*400mm
- M2 Nano control mainboard
- 40w/50w/60w full laser power
Share this page
Laser cutting engraving machine is widely used in cutting acrylic, MDF, plywood, paper, foam leather, felt etc;
Engraving acrylic, glass, MDF, wood, double color board, bamboo etc.
It is equiped with co2 laser tube, mainly cut rubber, plastic, cloth toys, leather, computer embroidery, mould, crafts, bamboo and wood products.
Open transparent test cover
The transparent top cover provides a view of the entire cabinet of the laser machine. the laser and the processing progress are visible directly on the machine. This makes it easy to see at a glance whether the laser is switched on, a job has been completed or stopped, which laser source is activated, etc. Thus unnecessary idle time can be avoided, saving time and money.
Fully open side cover
Thanks to the engineer’s design of the case’s side can be opened.
It makes the machine’s engraving is no longer limited. That means being able to work on workpieces that are larger than the machine. So it allows you to process very long and bulky workpieces such as doors, wall panels made of wood or large plates
Fully enclosed linear guide
The X-axis Effectively avoid the corrosion of the corrosive gas derailment rails generated during the machining process. Ensures trouble-free work over an extremely long period of time, extend the life of the machine.
The Y-axis thickened double linear bearing design provides more accurate positioning and higher accuracy.
Lihuiyu M2 nano control mainboard
M2 nano is a very popular laser machine control motherboard. It is usually used on small machines.
Because of its low cost and stable output, it is very convenient for laser users and enthusiasts.
The usb key guarantees origional software and prevents copy Software disturbs the market.
Full and free accessories
Our machines contain full set of accessories.
Receive the machine, install the accessories and use it.
Just so easy!
Smart 4060 specification
|Laser type||Hermetic CO2 glass tube|
|laser output||1-99.9% setting|
|laser power supply||AC110V/220V±50/60HZ|
|Motor system||Stepper motor system|
|Worktable||Manual up&down fixture platform|
|Support software||LaserDRW, CorelDRAW, CorelLASER|
|Graphic file format||BMP, PLT, AI, CDR, DXF, etc, USB Data transfer interface|
|Power supply||AC110V/220V±5% 50/60HZ|
|Cycle water temperature||Higher than: 0℃, less than: 50℃ Indoor temperature +10℃|
|Cooling model||Water cooling|
|Light system||LED light with high-brightness|